Are you getting the WSUS 0x80072EE6 error code when you try to update your Windows Server? If so, you’re not alone. Many WSUS users have reported this error, and it can be frustrating.
Fortunately, there are a few things you can do to fix the WSUS 0x80072EE6 error code. In this blog post, we’ll show you how to troubleshoot and fix this error.
Table of Contents
How to Fix WSUS 0x80072EE6 Error Code
What is WSUS 0x80072EE6 Error Code?
The WSUS 0x80072EE6 error code is a Windows Update error that occurs when your computer is unable to connect to the Windows Update server. This can be caused by a number of things, including firewall or proxy settings, or a problem with your internet connection.
There are a few things you can try to fix this error:
– Check your internet connection and make sure it is working properly.
– Check your firewall or proxy settings and make sure they are not blocking your connection to the Windows Update server.
– Try resetting the Windows Update components:
1. Press the Windows key + R to open the Run dialog box.
2. In the Run dialog box, type: cmd
3. Press Enter to open the Command Prompt.
4. In the Command Prompt, type the following commands, pressing Enter after each one:
– net stop wuauserv
– net stop bits
– net stop cryptsvc
– Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
– Ren C:\Windows\System32\catroot2 Catroot2.old
– net start wuauserv
– net start bits
– net start cryptsvc
5. Close the Command Prompt.
– Try running the Windows Update Troubleshooter:
1. Press the Windows key + R to open the Run dialog box.
2. In the Run dialog box, type: control /name Microsoft.Troubleshooting
3. Press Enter to open the Troubleshooting Control Panel.
4. In the Troubleshooting Control Panel, click View All in the left pane.
5. In the list of troubleshooters, click Windows Update.
6. Click Next and follow the prompts to run the troubleshooter.
If none of these solutions work, you may need to contact Microsoft support for further assistance.
Causes of WSUS 0x80072EE6 Error Code
One of the most common causes of the WSUS 0x80072EE6 error code is when the WSUS server is not configured to use a proxy server. If your WSUS server is not configured to use a proxy server, you will need to update the settings in the WSUS console. To do this, open the WSUS console and click on the “Options” button. In the “Options” dialog box, click on the “Proxy Settings” tab. Next, select the “Use a proxy server when updating clients” option and enter the proxy server information.
Another common cause of the WSUS 0x80072EE6 error code is when the WSUS server is unable to connect to the Internet. This can be caused by a number of factors, such as a firewall blocking access to the WSUS server, or the WSUS server not being able to resolve DNS names. If you are able to connect to the WSUS server from another computer, you will need to check the firewall settings on the WSUS server. If you are unable to connect to the WSUS server from another computer, you will need to check the DNS settings on the WSUS server.
If you are still seeing the WSUS 0x80072EE6 error code, it is possible that the problem is with the WSUS database. To resolve this issue, you will need to run the “Wsusutil.exe” tool on the WSUS server. This tool can be found in the “C:\Program Files\Update Services\Tools” folder. To run the tool, open a command prompt and change to the “C:\Program Files\Update Services\Tools” folder. Then, type the following command and press Enter:
wsusutil.exe reset
After running this command, you should restart the WSUS service.
How to Fix WSUS 0x80072EE6 Error Code
If you’re seeing the 0x80072EE6 error code when trying to use the Windows Server Update Services (WSUS) console, it means that there’s a problem communicating with the WSUS server. There are a few potential causes for this error, so you’ll need to troubleshoot to narrow down the source of the problem.
One potential cause is that the WSUS server is configured to use an invalid proxy server. To fix this, open the WSUS console and go to Options > Proxy Server. Make sure that the proxy server settings are correct and that you can connect to the proxy server.
Another potential cause is that the WSUS server is not configured to use SSL. To fix this, open the WSUS console and go to Options > Update Source and Proxy Server. Under the Secure Sockets Layer (SSL) section, check the box next to Enable SSL for connections to this server.
If neither of these solutions fix the problem, then the issue is likely with the WSUS server itself. Try restarting the WSUS service and see if that clears up the error. If not, then you’ll need to contact your WSUS administrator for further assistance.
Conclusion
If you’re seeing the WSUS 0x80072EE6 error code, it means that there is a communication issue between your computer and the WSUS server. This can be caused by a number of things, including firewall settings, proxy settings, or incorrect DNS settings. To fix the problem, you’ll need to check each of these areas and make sure that everything is configured correctly. Once you’ve done that, the WSUS 0x80072EE6 error should be resolved.
FAQ
Q: What is the WSUS 0x80072EE6 error code?
A: The WSUS 0x80072EE6 error code is a Windows Update error that indicates that the server is not responding. This can be caused by a number of factors, including the server being down or unavailable, or a network connection issue.
Q: How can I fix the WSUS 0x80072EE6 error code?
A: To fix the WSUS 0x80072EE6 error code, you will need to check the status of the WSUS server and ensure that it is up and running. You will also need to check your network connection to ensure that there are no issues that are preventing communication with the server.
Resources
If you’re receiving the 0x80072EE6 error code when trying to update Windows through the Windows Server Update Services (WSUS), it’s likely due to a connection issue between your computer and the WSUS server. To fix this, you’ll need to troubleshoot the connection between your computer and the WSUS server.
First, check that your computer is able to connect to the WSUS server. To do this, open a web browser and navigate to the WSUS server’s URL. If you’re able to connect and see the WSUS homepage, then the connection between your computer and the WSUS server is working.
If you’re not able to connect to the WSUS server, then there may be a firewall blocking the connection. To check this, you’ll need to contact your network administrator and ask them to check the firewall settings.
Once you’ve confirmed that the connection between your computer and the WSUS server is working, the next step is to check the proxy settings. To do this, open the Internet Explorer settings on your computer and go to the “Connections” tab. Under the “Local Area Network (LAN) settings” section, check to see if the “Use a proxy server for your LAN” option is selected. If it is, then you’ll need to enter the proxy settings in the “Address” and “Port” fields.
After you’ve checked the connection and proxy settings, try updating Windows again through the WSUS server. If you’re still receiving the 0x80072EE6 error code, then you may need to reset the WSUS settings on your computer. To do this, open the “Command Prompt” on your computer and run the following commands:
wsusutil reset
net stop wuauserv
net start wuauserv
After you’ve reset the WSUS settings, try updating Windows again. If you’re still receiving the 0x80072EE6 error code, then you may need to contact your network administrator or Microsoft support for further assistance.
Author’s Bio
I’m a professional software engineer and have been working in the industry for over 10 years. I have experience with a wide range of programming languages and platforms. I’m also a technical writer and have written a number of articles on various topics.
